Stainless steel plate is generally used in straight wire and random wire two shapes, stainless steel pipe using straight wire. The drawing unit is "mesh", and the larger the mesh number, the finer the filaments formed on the steel surface.

Stainless steel can be divided into five categories: iron coil, iron plate, profile, steel pipe and parts, and the most important is iron coil and iron plate. Profiles are all kinds of materials made of different shapes of plates, including Angle steel, flat steel, I-steel and channel steel.

It is precisely because of the high requirements of the surface of the stainless steel coil that the following points should be paid attention to when selecting and using the pad paper, the selection of excellent pad paper, the paper surface can not contain pulp, hard dust and other non-fiber impurities.

With the increasing development of the economy, people's pursuit of quality of life is getting higher and higher, and the use of stainless steel closely related to everyone's life has also increased significantly.

The production process of cold-rolled stainless steel strip includes heat treatment, pickling and grinding of hot-rolled steel strip. Smooth; Cross cut into steel plate or longitudinally cut into steel strip; Categorize; Clean and pack.

And the thickness of the pipe can also make a difference. Although there is little difference in thickness under the same caliber, if the pipe is thicker, the surface effect will be relatively poor.

In order to further improve the characteristics of 316L stainless steel pipes, there are several specific methods for processing the internal and external surfaces of the pipes: pickling passivation (AP), mechanical polishing (MP), bright annealing (BA) and electrolytic polishing (EP) processing processes.

304 stainless steel is an austenitic stainless steel containing 18% chromium and 8% nickel. Due to its excellent corrosion resistance, high ductility and low cost, it is the most widely used type of stainless steel. This alloy is non-magnetic and has good weldability and formability. The "304" in its name refers to its composition; It contains at least 18% chromium and 8% nickel.