Water jet cutting is the use of nozzles to generate high-pressure water jets carrying fine abrasive particles for cutting. This method is very effective for cutting gold and non-metallic materials. The process uses high capacity pumps and the water and electricity requirements are very high. This method can cut thick-gauge stainless steel (>100mm) without generating a heat-affected zone (HAZ) or changing the metallurgical structure of the stainless steel sheets. Although the water jet cutting quality is good, but when the cut section is thicker, the bevel angle of the cut surface is larger. It is not economical to cut thin steel plates with this method, but stacking multiple thin steel plates can cut multiple stainless steel sheets at a time.

Large transformers, energy-saving transformers of various grades for ultra-high voltage AC/DC transmission and distribution (including power transformers, distribution transformers,transformers, etc.)

Then, as the energy goes from the power lines into residential homes, it would be stepped down before going into the breaker box. To accomplish these tasks, electric transformers can be as large as buildings or as small as cellphones.

As far as the automobile industry is concerned, the global automobile industry is currently transforming to new energy sources and accelerating the realization of electrification. Among them, my country's new energy vehicles are developing the fastest. The rapidly increasing production and sales of new energy automobile have strongly stimulated the installed demand for driving motors. Practice has proved that the use of high-grade non-oriented silicon steel to make motor stators and rotors can not only improve the efficiency of driving motors for new energy automobiles, but also further reduce carbon emissions, which contributes to energy saving and carbon reduction in the entire life cycle of steel materials.

In our life, we can not live without stainless steel things, for example, there may be stainless steel pots for eating at home, there are stainless steel medical supplies in the hospital. Although both are stainless steel, but the difference between the two is still very large. So, what are the differences between medical stainless steel and food-grade stainless steel?

In November 2022, China's stainless steel exports totaled 400,800 tons, a month-on-month increase of 105,000 tons, an increase of 35.50%, and a year-on-year increase of 6,800 tons, an increase of 1.71%.From January to November 2022, China's stainless steel exports totaled 4.1607 million tons, an increase of 142,800 tons, an increase of 3.55%.

On the steel surface with stainless and corrosion resistance as the main characteristics, with a chromium content of at least 10.5% and a maximum carbon content of no more than 1.2%。Multicolor are realized through resin coating, chemical and electrochemical coloring, PVD vacuum coating and other technologies.

Urban rail transportation mainly includes metro, light rail, maglev, and tram transportation. Nowadays, more and more cities in China are engaged in the boom of developing urban rail transit. Urban rail transit to speed up the construction, and the demand for stainless steel will increase significantly.