News
News
Current Location : Home > News > Industry News > Precautions for Installation of Stainless Steel Decorative Plate
Precautions for Installation of Stainless Steel Decorative Plate
Time:2022-08-24 Source:WUXI HONGWANG Hits:78

Stainless steel decorative plate not only has the luster and strength of metal, but also has a constant color. Its chemical and physical properties are very good, and it is widely used in the decoration industry. When choosing this decorative panel, everyone needs to know how to install it correctly. Today, I will introduce the installation method of stainless steel decorative plate and the installation precautions of stainless steel decorative plate!



First, what is the installation method of stainless steel decorative plate? It was divided into: Installation framework - Fixed base plate - Fixed panel - Edge banding and other treatments. First, install the keel framework. During the whole installation processof stainless steel plate, we need to remember to check the verticality and flatness repeatedly.




Then the bottom plate is fixed. The bottom plate is usually 5-12mm thick plywood. The construction method and requirements are the same as those of ordinary wooden covers. However, if the keel is light steel keel or angle steel keel, please use an electric drill to drill a hole on the keel first. Fix the base plate on the keel with self tapping screws. Please note that the screw head should not be higher than the bottom plate surface.




Then, fix the panel. When there is a bottom plate, apply general glue on the back of the bottom plate and the stainless steel, and then gently paste the prepared stainless steel plate on the bottom plate. When there is no bottom plate, fix the pretreated stainless steel plate on the light steel keel, and use stainless steel screws or directly weld to the keel. In the final edge sealing treatment, the sealant shall be filled in one corner or corner of the stainless steel and the positive corner, and the edge shall be closed and decorated with pressure and other methods. Wipe the surface of the stainless steel decorative plate with a soft dry cloth, and then remove the protective film.

x