Mirror surface treatment of stainless steel products refers to a kind of bright surface effect obtained by using high-quality oilstone, diamond grinding paste and different grades of sandpaper through polishing and grinding equipment, through rough grinding, middle grinding and fine grinding. Let's take a brief look at the stainless steel mirror treatment process.
Stainless steel grinding process
The main purpose of stainless steel welded parts is to remove the solder joints to achieve a workpiece with a surface roughness of r10um and polish it! The grinding part can be summarized as follows: there are three processes: rough grinding, semi-finishing grinding and fine grinding. First of all, visually inspect the workpiece that is transferred to the polishing process from the latter process. If there are defects that cannot be compensated in this process, such as missing welding, penetration, uneven weld depth, excessive deviation from the joint, partial depression, uneven butt, deep scratches, bruises, severe deformation, etc., if there is no such defect, The polishing process is started.
Stainless steel surface polishing process
The main purpose of the lighting part is to polish the polished stainless steel after the mirror surface to achieve the purpose of the mirror surface. Generally speaking, this process has two processes: waxing, polishing and waxing. Use wool wheels driven by high-speed motors on the market. The main purpose of this process is to mirror polish the workpiece after the next few steps, rather than further grinding. Be careful not to rub the polishing wax on the surface of the workpiece and damage the covering film.
This is the final process of mirror polishing. After the latter process is completed, wipe the surface of the workpiece with a clean cotton wheel after rubbing the mirror surface, and wipe and polish the workpiece. The purpose of this process is to make the surface of the workpiece indistinguishable from welding traces, and to polish the workpiece after polishing, so that its brightness can reach 8K mirror reflection, and there is almost no difference between the polished part and the unpolished part. Achieve a complete mirror effect.
Stainless steel waxing
Generally speaking, the wool wheel is waxed after the workpiece is polished, and the wool wheel is polished after the green wax is applied. Definition: "8" in 8K is the proportion of alloy composition, "K" is the reflectance level after polishing, K level is the mirror reflection level of &41;, 8K mirror is the mirror level of chrome-nickel alloy steel.
Wuxi Hongwang Stainless Steel sells various types of mirror stainless steel and polished stainless steel products. If you want to know more details about stainless steel surface treatment process, please contact us.
Tag: mirror stainless steel, stainless steel surface polishing process, stainless steel grinding process
Introducing：Research and Analysis on Coiling Defects of Cold Rolled Stainless Steel Strips
2022-07-11Building curtain wall-316L low carbon stainless steel
2021-08-09Difference between medical stainless steel and food grade stainless steel
2024-04-29Non-oriented electrical steel project statistics
2023-11-22Current situation of transformer market under energy transition
2024-03-26Iron core soft magnetic materials can actually do thermoelectric materials
2024-05-31
